Author
Shell Lubricants
Shell Lubricants is releasing its new Shell Tellus S3 M Hydraulic Fluid, which uses exclusive, zinc-free anti-wear technology to deliver up to twice the life of Shell’s previous zinc-free product — as well as improved pump protection and system efficiency, the company says. The new hydraulic fluid is engineered to work under demanding temperature and operating conditions. When tested in the industry-standard ASTM D943 TOST oil life test, the hydraulic fluid achieved up to five times longer oil life than the minimum standard of 1,000 hours, and up to twice that of the previous Shell Tellus S product. Shell.us/lubricants Keep Reading
Eagle Iron Works
Eagle Iron Works offers the latest version of its classifying tank control software – Mark V-Touch. The company says it pioneered the development of computerized classifying tank controls with its introduction of the Mark V control in 1984. The Mark V-Touch classifying tank control software has been improved to make it more intuitive and easier to use. All control features are available by simply touching the screen and all settings can be changed with one or two touches. According to the manufacturer, within minutes the operator will be comfortable changing settings, specifications and products while letting the Autospec batching control system maintain the integrity of the stockpiles. EagleIronWorks.com Keep Reading
Tabor Machine Company LLC
Tabor Machine, an Elgin Equipment Group company, a specialist in screening and sizing equipment since 1961, offers a complete line of vibrating screens and feeders to meet demanding mining, mineral processing and aggregate applications. Tabor recently announced the availability of a 12-ft., multi-slope “banana” unit — and also that its vibrating screens can now be equipped with the new P3P pinless screening system from Norris Screen, another operating company of Elgin Equipment Group. Tabor_Machine_Company.aspx Photo: Tabor Machine Company LLC Keep Reading
Spokane Industries
The most common solution to impact crusher wear parts is high-chrome white iron, as it offers wear resistance to low-impact and sliding abrasion. However, it is possible to increase this wear resistance further using composite technology, where a material is combined with another to yield improved combined properties. Spokane Industries features a full line of wear-resistant parts manufactured using Si-Tec, its patented ceramic composite technology for HSI and VSI crushers. Si-Tec Extraordinary Wear-Resistant Parts quite often provide more than twice the wear life of standard parts, the company says. www.SpokaneIndustries.com/steel-foundry-impact-crusher.php Photo: Spokane Industries Keep Reading
Grindex
Grindex's range of professional light weight submersible pumps—Micro, Mini and Solid — are designed to be lightweight but durable for professional use. An air valve cools the motor during dry running. An external oil plug allows easy maintenance. The aluminum top cover and outer casing make the pumps even more durable for the toughest applications. According to the company, they are easy to install and service — and even easier to check the oil. All pumps can easily be equipped with a float switch if needed. www.grindexpumps.com Photo: Grindex Keep Reading
Cleveland Gear Company Inc.
Cleveland Gear Company Inc. offers a line of shaft mount reducers and accessories (tapered bushing kits, belt guards, torque arms, motor mounts and backstop assemblies). With eight CGSM sizes (2-9), input hp from 1/3 to 125 and output rpm from 4-6 up to 118-125, the company says these drives will provide reliable service for a variety of material-handling applications. The shaft mount reducers are suitable for AGMA Class I, II or III service for motor hp up to 125 with standard ratios of 15:1 and 25:1. Twin tapered bushing kits are perfectly sized for CGSM reducers as well as other manufacturers’ shaft mount drives, with bore diameters from 1 5/16 in. to 4 15/16 in. ClevelandGear.com Photo: Cleveland Gear Company Inc. Keep Reading
Sandvik
The Sandvik QJ341 mobile jaw crusher carries the features of its predecessor, the QJ340, such as a 1,200x750 mm feed opening, hydraulically adjustable closed-side setting (CSS), high reduction ratios and crushing speed, productivity, reverse crushing action to relieve blockages and automatic central lubrication system. Additionally, the QJ341 comes with new features to ensure continuous and uninterrupted crushing and greater operator safety, such as load control system for the feeder drive, a level sensor fitted to the jaw and a speed wheel fitted to the main conveyor. The customer will furthermore benefit from lower running costs and a more environmentally friendly machine, with a lower carbon footprint. Sandvik.com Photo: Sandvik Keep Reading
Bauma 2013
Bauma, the International Trade Fair for Construction Machinery, Building Material Machines, Mining Machines, Construction Vehicles and Construction Equipment, takes place April 15-21, 2013, at the trade fair grounds in Munich, Germany. The last Bauma in 2010 attracted 3,256 exhibitors from 53 countries, and more than 420,000 visitors from more than 200 nations. For Bauma 2013, all space at the show is already fully booked — and the next show has a waiting list for all sections of the exhibition. This is despite the fact that the exhibition space allocated to the event has been extended to a record 570,000 sq.m. Bauma.de Keep Reading
John Deere
The John Deere 844K wheel loader is a Tier 3 emission-certified machine with a John Deere PowerTech diesel engine that produces 380 hp. Designed to increase productivity and uptime, the 844K unit features the Quad-Cool system, which provides wide-open access to both sides of the coolers for easy cleanout and an easy-to-read LCD screen with onboard diagnostics. The NeverGrease pin joint option keeps joints tight longer for more productive operation, extending pin life overall and eliminating daily greasing. Single-side ground-level service makes daily maintenance easy. Deere.com Photo: John Deere Keep Reading
